Configuring Postfix to block outgoing mail to all but one domain

This is so simple to do, but I have to look it up every time I need it (not something that comes up regularly!);

When configuring a development server, you may find you have a need to ensure that emails will not be sent to any domain except those you explicitly permit (for example if you're using real-world data to do some testing, do you want to send all those users irrelevant emails?).

This documentation details how to configure Postfix on a Linux server to disregard any mail sent to domains that are not explicitly permitted.


Don't use IPTables

You could, of course, add two IPTables rules to the outgoing chain. The first of which would allow connections on Port 25 to the domain you wish to allow, the second blocking connection to any server on Port 25.

It'll block the mail from being sent, but will mean that every one of those messages sits in the mail queue for 60 days until it's disregarded. You could reconfigure the timeout, but given the ease of the steps below, what's the point?


Use Transport Mapping

Using this method, we can tell Postfix to either reject the mail, or disregard it. The latter is generally the preferred method as we want the sending application to believe the mail has been sent.

First we need to edit the postfix configuration file

nano /etc/postfix/

Now search for transport_maps (Ctrl-W, transport_maps -> Enter). You shouldn't find anything (if you do, skip the next step, but make note of which file is listed)

Add a line reading

transport_maps = hash:/etc/postfix/transport

Note: Depending on the version of Postfix you're running, you could use texthash which would avoid needing to run postmap on the file. It's up to the reader to work out which route they'd prefer, but if your postfix version is < 2.8 you can't use texthash.

Save and close (Ctrl-X, Y -> Enter)

Now we need to update the transport maps (if you didn't need to add a line, subsitute the relevant file path here)

nano /etc/postfix/transport

Now we need to add a line specifying which domain to allow sending to (I'm going to allow to To do so, insert the following lines :
* discard:

This will simply discard messages to any email address not of the domain If you wanted to reject with an error you'd use (set the error text to suit your needs)
* error: Only allowing one domain

Note: Simply add additional domains on the line after, one line per domain.

Save and close (Ctrl-X, Y -> Enter)

Now we need to create a hash of the file (unless you used texthash in

postmap /etc/postfix/transport

Finally, we need Postfix to reload it's rules

/etc/init.d/postfix reload

Job done! You should now find that emails sent to domains not specified are silently discarded, whilst those for whitelisted domains go through as normal. Be sure to check that the change has worked though, mailq and the maillog are your friends!

For non-whitelisted domains you should see the message being removed in the maillog but with no connection taking place before hand, and relay showing as none (there may be no sign of a connection, but if relay != none there's a very good chance the mail was sent).